Gun G.S., Mezin I.Yu., Rubin G.Sh., Minayev A.A., Nazaybekov A.B., Dyja H. The research genesis in the field of metal products quality

Abstract

The national school of quantitative methods in quality measuring - qualimetry has been developing for over 30 years. There is a number of research centres on qualimetry issues in Russia, Kazakhstan and Ukraine. The researchers of these centres made all efforts to form qualimetry extensive subsection – ferrous metallurgy qualimetry. The research on metallurgy qualimetry has been actively developing at Magnitogorsk State Technical University. Training of engineers since 1997 and at present Bachelors and Masters in «Standardization and Certification», as well as the work and activities of Doctoral Dissertation Council on specialty «Standardization and Quality Management» (in metallurgy) are fruitful base for research in the field of quality. Along with specific engineering developments on quality evaluation of products and processes in the ferrous metallurgy important results in the special and general qualimetry were obtained. They concern the methods of properties structuring, their graduation according to the Category of influence on integrated assessment, varied approach to quality evaluation at different stages of the product life cycle.

Keywords

Qualimetry, metal products, quality, dominating indicators, compensable indicators, product life cycle, functional and objective analysis.

Gun Gennadij Semenovich – D.Sc. (Eng.), Professor, Advisor to the Rector, Nosov Magnitogorsk State Technical University, Russia.

Mezin Igor Yurjevitch – D.Sc. (Eng.), Professor, Head of Standardization, Chemistry and Bioengineering Faculty, Nosov Magnitogorsk State Technical University, Russia.

Rubin Gennadiy Shmulyevich – Ph.D. (Eng.), Associate Professor, Nosov Magnitogorsk State Technical University, Russia. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

Minayev Aleksander Anatolyevich – D.Sc. (Eng.), Professor, Rector of Donetsk National Technical University, Ukraine. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

Nazaybekov Abdrakhman Batyrbekovich – Academician, D.Sc. (Eng.), Professor, Rector of Rudny Industrial Institute, Ka-zakhstan. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

Dyja Henrik – D.Sc. (Eng.), Professor, Director of the Institute of Metal Forming and Engineering Security, Czestochowa Uni-versity of Technology, Poland. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

References

1. Rubin G. Sh., Gun G.S. Logicheskie zakony otsenki kachestva produktsii [Logical rules of product quality rating]. Magnitogorsk, 1981. 23 p. Deposited by VINITI 19.09.1981, № 4105-81 B.

2. Gun G. S. Upravlenie kachestvom vysokotochnykh profiley [Quality management of high-precision profiles]. Moscow: Metallurgy, 1984, 152 p.

3. Gun G.S., Rubin G. Sh., Chukin M.V., Gun I.G., Mezin I.U. Korchunov A.G. Metallurgy qualimetry theory design and development. Vestnik Magnitogorskogo gosudarstvennogo tehnicheskogo universiteta im. G.I. Nosova. [Vestnik of Nosov Magnitogorsk State Technical University]. 2013, no. 5, рр. 67-70.

4. Zakirov D. M., Rubin G. Sh., Mezin I. Yu. et al. Kvalimetricheskaya otsenka proizvodstva avtomobilnogo krepezha : monografiya [Quality control estimation of automobile hardware production : monography]. Magnitogirsk : Nosov Magnitogorsk State Technical University, 2007, 158 p.

5. Gun I. G., Rubin G. Sh., Salnikov V.V. Kompleksnaya otsenka effektivnosti protsessov proizvodstva sharovykh paltsev [Complex efficiency evaluation of production processes of ball pins]. Magnitogirsk : Nosov Magnitogorsk State Technical University, 2008. 133 p.

6. Korchunov A.G., Chukin M.V., Gun G.S., Polyakova M.A. Upravlenie kachestvom produktsii v tehnologiyah metiznogo proizvodstva: monografiya [Product quality management in hardware production technologies: monograph. Moscow: Publishing House «Ore and Metals», 2012, 164 p.

7. Zakirov D.M., Rubin G.Sh., Mezin I.Yu., Galiakhmetov T.Sh., Andre-yev V.V. Upravleniye kachestvom pri proizvodstve shipov protivos-kol'zheniya: monografiya. [Quality control in the manufacture of anti-sliding motion studs: monograph]. Magnitogorsk: Nosov Magnitogorsk State Technical University, 2008, 114.

8. Gun I.G., Mikhailovsky I.A., Osipov D.S. Kvalimetricheskaya otsenka i povyishenie rezultativnosti skvoznoy tehnologii i sistemyi menedzhmenta kachestva proizvodstva sharovyih paltsev: monografiya [Qualimetric assessment and enhanced efficiency through technology and quality management system production ball joints: monograph]. Magnitogorsk: Nosov Magnitogorsk State Technical University, 2008, 147 p.

9. Azgaldov G.G. Potrebitel'skaya stoimost' i yeyo izmereniye. [Use value and its measurement]. M: Economics, 1971. 167 p.

10. Azgaldov G.G., Raykhman E.P. O kvalimetrii [About qualimetry]. Moscow: Standards, 1972, 172 p.

11. Rubin G.Sh., Vakhitova F.T., Lebedev V.N., Guseva Ye.N., Shishov A.A. Metodologicheskiy podkhod k upravleniyu kachestvom metiznoy produktsii, osnovannyy na nechetkikh mnozhestvakh. [Methodological approach to hardware products quality management based on fuzzy sets]. Vestnik Magnitogorskogo gosudarstvennogo tehnicheskogo universiteta im. G.I. Nosova. [Vestnik of Nosov Magnitogorsk State Technical University]. 2009, no. 4, pp. 50-53.

12. Rubin G.Sh. Kvalimetriya metiznogo proizvodstva [Qualimetry of hardware production] Magnitogorsk: Nosov Magnitogorsk State Technical University, 2012, 167 p.

13. Rubin G.SH., Kamalutdinov I.M. Funktsional'nyy analiz struktury svoystv geofizicheskogo kabelya. [Functional analysis of the structure properties of geophysical cable]. Vestnik Magnitogorskogo gosudarstvennogo tehnicheskogo universiteta im. G.I. Nosova. [Vestnik of Nosov Magnitogorsk State Technical University]. 2010, no. 1, pp. 70-71.

14. Mezin I.Yu., Yakovleva Ye.S., Kasatkina Ye.G., Kutsependik V.I. Kvalimetricheskaya otsenka proizvodstvennykh protsessov izgotovleniya metalloizdeliy. [Qualimetric assessment of manufacturing processes of manufacture of metal]. Vestnik Magnitogorskogo gosudarstvennogo tehnicheskogo universiteta im. G.I. Nosova. [Vestnik of Nosov Magnitogorsk State Technical University]. 2010, no. 2, pp. 67-69.

15. Rubin G.Sh., Chukin M.V., Gun G.S., Zakirov D.M., Gun I.G. Razrabotka teorii kvalimetrii metiznogo proizvodstva. [Development of the theory of hardware production qualimetry. Chernyye metally. [Ferrous metals]. 2012, no. 6, pp. 15-20.

16. Rubin G.S., Polyakova M.A., Chukin M.V., Gun G.S. Protypology – a new stage of development of standardization metalware production. Stal’ [Steel], 2013, no. 10, pp. 84-87.

17. Gun G.S., Chukin M.V., Rubin G.SH. Upravleniye kachestvom v metiznom proizvodstve. [Quality management in hardware production]. Metallurgicheskiye protsessy i oborudovaniye. [Metallurgical processes and equipment]. 2013, no. 4 (34). pp. 106-112.

Details: Published: 07 September 2015; Last Updated: 07 September 2015; Hits: 3339