Artamonov E.V., Shtin A.S., Tveryakov A.M., Vasilega D.S. Research on the Relationship Between Tool Material Properties and the Cutting Process: a Case Study of Turning 12H18N10T Steel

DOI: 10.18503/1995-2732-2025-23-4-80-86

Abstract

Problem Statement (Relevance). Modern gas turbine engines impose high requirements to the materials used in their constructions. Parts of such engines as turbine blades, discs, combustion chambers and nozzle assembly work in extreme conditions: at high temperatures, significant mechanical loads and aggressive media. Objectives. The aim of the work is to study the properties of tool hard alloys of WC8 (92%WC+8%Co), TiC5С10 (85%WC+5%TiC+10%Co) and TiC14С8 (78%WC+14%TiC+8%Co) grades and their influence on the cutting process characteristics of cryogenic structural 12H18N10Т (0,12%С+18%Cr+10%Ni+10%Ti+61,88%Fe) steel. Methods Applied. When solving the above mentioned problems, theoretical and experimental methods of study of metal cutting, cutting tools and laws of physics of electrodynamics field were used. Originality. The interrelation of physical and mechanical characteristics of materials with mechanical characteristics of cutting process is established. Result. The conducted research has shown that the intensity of tool wear, roughness value and coldworking of the processed surface are correlated. Practical significance. The results of research in this area are of key importance for aviation and power engineering, where the reduction of production cost of parts while maintaining their reliability remains one of the most important tasks

Keywords

cutting of materials, turning process, physical and technical characteristics of materials, hard alloys, mechanical characteristics of the cutting process

For citation

Artamonov E.V., Shtin A.S., Tveryakov A.M., Vasilega D.S. Research on the Relationship Between Tool Material Properties and the Cutting Process: a Case Study of Turning 12H18N10T Steel. Vestnik Magnitogorskogo Gosudarstvennogo Tekhnicheskogo Universiteta im. G.I. Nosova [Vestnik of Nosov Magnitogorsk State Technical University]. 2025, vol. 23, no. 4, pp. 80-86. https://doi.org/10.18503/1995-2732-2025-23-4-80-86

Evgeny V. Artamonov – DrSc (Eng.), Professor, Professor of the Department of Machine Tools, Industrial University of Tyumen, Tyumen, Russia Еmail: This email address is being protected from spambots. You need JavaScript enabled to view it.. ORCID 0000-0002-3099-4435

Anton S. Shtin – PhD(Eng.), Associate Professor, Associate Professor of the Department of Machine Tools, Industrial University of Tyumen, Tyumen, Russia Еmail: This email address is being protected from spambots. You need JavaScript enabled to view it.. ORCID 0000-0002-7000-6761

Andrey M. Tveryakov – PhD (Eng.), Associate Professor, Head of the Oil and Gas Institute, Industrial University of Tyumen, Tyumen, Russia Еmail: This email address is being protected from spambots. You need JavaScript enabled to view it.. ORCID 0000-0002-6441-2559

Dmitry S. Vasilega – PhD (Eng.), Associate Professor, Associate Professor of the Department of Machine Tools, Industrial University of Tyumen, Tyumen, Russia Еmail: This email address is being protected from spambots. You need JavaScript enabled to view it.. ORCID 0000-0001-7618-7906

1. Bobrov V.D. Osnovy teorii rezaniya metallov [Fundamentals of the theory of metal cutting]. Moscow: Mashinostroenie, 1975, 344 p. (In Russ.)

2. Vasin S.A., Vereshchaka A.S., Kushner V.S. Rezanie materialov. Termomekhanicheskiy podkhod k sisteme vzaimosvyazey pri rezanii [Cutting of materials. Thermomechanical approach to the system of correlation in cutting]. Moscow: Publishing House of Bauman MSTU, 2001, 448 p. (In Russ.)

3. Vereshchaka A.S., Kushner V.S. Rezanie materialov [Cutting of materials]. Moscow : Vysshaya shkola, 2009, 534 p. (In Russ.)

4. Granovsky G.I., Granovsky V.G. Rezanie metallov [Cutting of metals]. Moscow: Vysshaya shkola, 1985, 304 p. (In Russ.)

5. Grigoriev S.N., Tereshin M.V. Increase of the tool resource utilisation by controlling the cutting process by the maximum temperature. Gorniy informatsionno-analiticheskiy byulleten (nauchno-tekhnicheskiy zhurnal) [Mining informational and analytical bulletin (scientific and technical journal)]. 2011;(4):3-6. (In Russ.)

6. Dreval A.E., Malkova L.D. Joint influence of machining parameters on the value of cutting force components. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie [BMSTU Journal of Mechanical Engineering]. 2007;(8):53-60. (In Russ.) EDN UAADXX.

7. Zorev N.N. Voprosy mekhaniki protsessa rezaniya metallov [Issues of mechanics of metal cutting process]. Moscow: Mashgiz, 1956, 368 p. (In Russ.)

8. Kabaldin Yu. G. Friction and tool wear during cutting. Vestnik Mashinostroeniya [Russian Engineering Research]. 1995;(1):26-31. (In Russ.)

9. Kramer G.S. Prochnost tvyordykh splavov [Strength of hard alloys]. Moscow: Metallurgy, 1971, 247 p. (In Russ.)

10. Loladze T.N. Prochnost i iznosostoikost rezhushchego instrumenta [Strength and wear resistance of a cutting tool]. Moscow: Mashinostroenie, 1982, 320 p. (In Russ.)

11. Makarov A.D. Optimizatsiya protsessov rezaniya [Optimisation of cutting processes]. Moscow: Mashinostroenie, 1976, 278 p. (In Russ.)

12. Poletika M.F. Kontaktnye nagruzki na rezhushchikh poverhnostyakh instrumenta [Contact loads on the cutting surfaces of the tool]. Moscow: Mashinostroenie, 1969, 148 p. (In Russ.)

13. Silin S.S. Metod podobiya pri rezanii metallov [Method of similarity in metal cutting]. Moscow: Mashinostroenie, 1979, 152 p. (In Russ.)

14. Carceanu I., Cosmeleatǎ G., Ghiban B., Balanescu M., Nedelcu I. High performance composite materials created through advanced techniques. Materiale Plastice. 2007;44:321-325.

15. Ferri C., Minton T., Ghani S.B., Cheng K. Internally cooled tools and cutting temperature in contamination-free machining. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2014;228:135-145.

16. Kümmel J., Braun D., Gibmeier J., Schneider J., Greiner C., Schulze V., Wanner A. Study on micro texturing of uncoated cemented carbide cutting tools for wear improvement and built-up edge stabilization. Journal of Materials Processing Technology. 2015;215:62-70.

17. Munish Kumar Gupta, Pardeep Kumar Sood, Gurraj Singh, Vishal S. Sharma. Sustainable Machining of Aerospace Material - Ti (grade-2) alloy: Modelling and Optimization. Journal of Cleaner Production. 2017;33:133-138.

18. Murthy K.S., Rajendran I. Optimization of end milling parameters under minimum quantity lubrication using principal component analysis and grey relational analysis. Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2012;34:253-261.

19. Neugebauer R., Hochmuth C., Schmidt G., Dix M. Energy efficient process planning based on numerical simulations. 17th CIRP Conference on Modelling of Machining Operations. 2011;223:212-221.

20. Nurulamin A., Jaafar I., Zubaire W. Role of discrete nature of chip formation and natural vibrations of system components in chatter formation during metal cutting. IIUM Engineering Journal. 2010;(11):124-126.

21. Patwari A., Amin N., Faris W. Investigations of formation of chatter in a non-wavy surface during thread cutting and turning operations. Advanced Materials Research. 2010;(83):637-645.

22. Tillmann W., Schaak C., Biermann D., Abmuth R., Goeke S. Robot based deposition of WC-Co HVOF coatings on HSS cutting tools as a substitution for solid cemented carbide cutting tools. IOP Conference Series: Materials Science and Engineering. 2017;181:127-135.

Details: Published: 23 December 2025; Last Updated: 23 December 2025; Hits: 88