Poleshchenko K.N.,Korotaev D.N.,Eremin E.N.,Nesov S.N.,Tarasov E.E.,Teploukhov A.A.,Semenyuk N.A.,Ivanova E.V.,Lasitsa A.M.,Ivanov A.L. Formation of Nanostructured Topocomposites with Cluster-Gradient Architecture by Combined Ion-Vacuum Processing

DOI: 10.18503/1995-2732-2021-19-2-68-78

Abstract

Problem Statement (relevance of the research). The variety of different types of surface damage to materials in the operation of vehicles and mechanisms contributes to current relevance of basic and applied research on the creation of new wear-resistant materials. Improving the nanostructured topocomposites by creating additional, locally dissipative structural elements is the most promising direction for creating a new type of nanostructured topocomposites with cluster-gradient architecture. Methods Applied. An improved unit was used to carry out ion-plasma and ion-beam processing under conditions of a discrete and varying front. Novelty. Studies of the evolution of the coating structure were carried out depending on the conditions of ion-vacuum processing. The authors established the effects of "stratification" of the cluster phase and texturing of the condensed phase during ion-plasma sputtering. They tested the technological solutions combining selective ion processing, ion assistance and coating deposition to form the required topocomposite surface structure. The change in the coating phase composition along depth was studied. Result. It was found that during combined ion-vacuum processing, titanium oxynitrides are formed in the "coating-base" interface. This paper presents results of the formation of nanostructured topocomposites with cluster-gradient architecture. Practical significance. It is shown that these phases along with the cluster morphology of topocomposites are positive factors contributing to an increase in wear resistance under severe conditions of temperature-dynamic loading, when cutting a difficult-to-machine nickel alloy.

Keywords

Ion-plasma processing, ion-beam processing, nanostructured topocomposites with cluster-gradient architecture, cluster phase, nanocluster morphology.

For citation

Poleshchenko K.N., Korotaev D.N., Eremin E.N., Nesov S.N., Tarasov E.E., Teploukhov A.A., Semenyuk N.A., Ivanova E.V., Lasitsa A.M., Ivanov A.L. Formation of Nanostructured Topocomposites with Cluster-Gradient Architecture by Combined Ion-Vacuum Processing. Vestnik Magnitogorskogo Gosudarstvennogo Tekhnicheskogo Universiteta im. G.I. Nosova [Vestnik of Nosov Magnitogorsk State Technical University]. 2021, vol. 19, no. 2, pp. 68–78. https://doi.org/10.18503/1995-2732-2021-19-2-68-78

Konstantin N. Poleshchenko – DrSc (Eng.), Professor, Chief Research Officer of the Research Department, Siberian State Automobile and Highway University, Omsk, Russia. Email: This email address is being protected from spambots. You need JavaScript enabled to view it.. ORCID 0000-0002-8623-4777

Dmitriy N. Korotaev – DrSc (Eng.), Professor, Sergo Ordzhonikidze Russian State University for Geological Prospecting, Moscow, Russia. Email: This email address is being protected from spambots. You need JavaScript enabled to view it.. ORCID 0000-0002-5957-4135

Evgeniy N. Eremin – DrSc (Eng.), Professor, Omsk State Technical University, Omsk, Russia. Email: This email address is being protected from spambots. You need JavaScript enabled to view it.. ORCID 0000-0001-7357-8194

Sergey N. Nesov – PhD (Physics and Mathematics), Senior Lecturer, Omsk State Technical University, Omsk, Russia. Email: This email address is being protected from spambots. You need JavaScript enabled to view it.. ORCID 0000-0003-0421-3356

Evgeniy E. Tarasov – process engineer, Federal Research and Production Centre Progress, Omsk, Russia. Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Andrey A. Teploukhov – PhD (Eng.), Associate Professor, Omsk State Technical University, Chief Specialist, LLC Omsk Carbon Group, Omsk, Russia. Email: This email address is being protected from spambots. You need JavaScript enabled to view it.. ORCID 0000-0002-5649-2871

Natalya A. Semenyuk – PhD (Eng.), Senior Lecturer, Omsk State Technical University, Omsk, Russia. Email: This email address is being protected from spambots. You need JavaScript enabled to view it.. ORCID 0000-0003-0103-7684

Elena V. Ivanova – PhD (Eng.), Associate Professor, Sergo Ordzhonikidze Russian State University for Geological Prospecting, Moscow, Russia. Email: This email address is being protected from spambots. You need JavaScript enabled to view it.. ORCID 0000-0003-1107-0533

Alexander M. Lasitsa – PhD (Eng.), Associate Professor, Omsk State Technical University, Omsk, Russia. Email: This email address is being protected from spambots. You need JavaScript enabled to view it.. ORCID 0000-0002-7187-6400

Alexander L. Ivanov – PhD (Eng.), Associate Professor, Siberian State Automobile and Highway University, Omsk, Russia. Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

1. Grigoriev S.N., Vereschaka A.A., Vereschaka, A.S., Kutin A.A. Cutting tools made of layered composite ceramics with nano-scale multilayered coatings. Procedia CIRP, no. 1, pp. 318–323 (2012).

2. Vereshchaka A.S., Karpuschewski B., Dubner L. Development of the method of obtaining nanostructured functional coatings. Proceedings of the Intern. Scient. Conf. “Production. Technology”, vol. 1, 62 p. (2008).

3. Smith I.J., Muenz W.D., Donohue L.A., Petrov I., Greene J.E. Improved Ti1–xAlxN PVD coatings for dry high speed cutting operations. Surf Eng, vol. 14 (1), pp. 37–41 (1998).

4. Blinkov I.V., Volkhonskii A.O., Anikin V.N., Petrzhik M.I., Derevtsova D.E. Phase composition and properties of wear resistant Ti–Al–Cr–Zr–Nb–N coatings manufactured by the arc physical deposition method. Inorganic Materials: Applied Research, vol. 2, no. 3, pp. 285–291 (2011).

5. Volkhonskii A.O., Blinkov I.V., Elyutin A.V., Podstyazhonok O.B. High-performance wear-resistant ion-plasma coatings based on five-component nitrides for a hard-alloy cutting tool operating under constant loads. Metallurgist, vol. 54, pp. 374–377 (2010).

6. Blinkov I.V., Volkhonsky A.O., Podstyazhonok O.B. Structure and properties of multilayer coatings deposited with PVD-arc technology. Surface engineering, no. 2, pp. 57–63 (2011).

7. Upadhyay R., Brossard N., Chen C.H. Mechanisms underlying astringency: introduction to an oral tribology approach. J. Phys. D: Appl. Phys, vol. 49, p. 104003 (2016).

8. Grinberg P.B., Korotaev D.N., Poleshchenko K.N., Surikov V.I. Development and production of nanostructured topocomposites. Vestnik SibADI [The Russian Automobile and Highway Industry Journal], 2015, no. 3(43), pp. 39–45. (In Russ.)

9. Grinberg P.B., Poleshchenko K.N., Goryunov V.N., Tarasov E.E. The method of producing nanostructured topocomposites to increase carrying capacity of structural elements of power equipment. Vestnik Omskogo universiteta [Herald of Omsk University], 2012, no. 2, pp. 253–258. (In Russ.)

10. Poleshchenko K.N., Korotaev D.N., Tarasov E.E. Structural and morphological features of nanostructured topocomposite coatings of a tribotechnical application. Vestnik SibADI [The Russian Automobile and Highway Industry Journal], 2016, no. 4(50), pp. 126–132. (In Russ.)

11. Korotaev D.N., Tarasov E.E., Poleschenko K.N., Eremin E.N., Ivanova E.V. Formation of wear resistant nanostructural topocomposite coatings on metal materials by ionic-plasma processing. Journal of Phys.: Conf. Ser., vol. 1050(1), pp. 012037 (2018).

12. Grinberg P.B., Poleschenko K.N., Korotaev D. N., Orlov P.V., Vershinin G.A., Tarasov E.E., Ivanova E.V. Receiving nanostructural topocomposite coatings in terms of the cascade cross effect. Journal of Phys.: Conf. Ser., vol. 1210, pp. 012054 (2019).

13. Korotaev D.N., Poleshchenko K.N., Eremin E.N., Tarasov E.E. The effect of cluster-gradient architecture of nanostructured topocomposites on features of tribological relations with a heterophase material. Uprochnyayushchie tekhnologii i pokrytiya [Strengthening Technologies and Coatings], 2020, vol. 16, no. 3 (183), pp. 130–135. (In Russ.)

14. Moiseenko D.D., Maksimov P.O. The effect of a “chessboard” and forming helical mesostructures at the interface “surface layer – substrate”: simulation by applying a stochastic approach. Fizicheskaya mezomekhanika [Physical Mesomechanics], 2005, vol. 8, no. 6, pp. 89–96. (In Russ.)

15. Vereschaka A.S., Vereschaka A.A., Kirillov A.K. Ecologically friendly dry machining by cutting tool from layered composition ceramic with nano-scale multilayered coatings. Key Eng. Materials, vol. 496, pp. 67–76 (2012).

16. Veprek S., Argon A.S. Mechanical properties of super hard nanocomposites. Surf. Coat. Technol, pp. 175–182 (2001).

17. Panin V.E., Panin A.V. The effect of a surface layer in deformed solids. Fizicheskaya mezomekhanika [Physical Mesomechanics], 2005, vol. 8, no. 5, pp. 7–15. (In Russ.)

18. Panin V.E., Panin A.V., Elsukova T.F., Kuzina O.V. The effect of a “chessboard” in distributing stresses and strains at interfaces in loaded bodies: experimental verification and mechanisms of mesoscopic channeling. Fizicheskaya mezomekhanika [Physical Mesomechanics], 2005, vol. 8, no. 6, pp. 97–105. (In Russ.)

19. Ivanova V.S., Bushe N.A., Gershman I.S. Structural adaptability to friction as a process of self-organization. Trenie i iznos [Friction and Wear], 1997, vol. 18, no. 1, pp. 74–79. (In Russ.)

20. Kim V.A. Samoorganizatsiya v protsessakh uprochneniya, treniya i iznashivaniya rezhushchego instrumenta [Self-organization in processes of hardening, friction and wear of cutting tools]. Vladivostok: Dalnauka, 2001, 203 p. (In Russ.)

21. Bershadsky L.I. Strukturnaya termodinamika tribosistem [Structural thermodynamics of tribological systems]. Kiev: Znanie, 1990, 253 p. (In Russ.)

22. Migranov M.Sh., Shuster L.Sh. Intensifikatsiya protsessa metalloobrabotki na osnove ispolzovaniya effekta samoorganizatsii pri trenii [Intensifying the process of metal treatment by using the effect of self-organization during friction]. Moscow: Mashinostroenie, 2005, 202 p. (In Russ.)

23. Korotaev D.N., Poleshchenko K.N., Eremin E.N., Orlov P.V., Vershinin G.A., Tarasov E.E. The effect of a long-range action, when forming nanostructured topocomposites by applying combined ion-plasma flows. Uprochnyayushchie tekhnologii i pokrytiya [Strengthening Technologies and Coatings], 2020, vol. 16, no. 4 (184), pp. 187–192. (In Russ.)