Maltsev G.I., Timofeev K.L., Popov A.I. Thermodynamic prediction of reduction smelting of lead саke

Abstract

Problem Statement (Relevance): This article examines the possibility of creating an environmentally friendly, technologically efficient and cost-effective high-performance reprocessing technology for lead-containing middlings and wastes. Using the example of the pyrometallurgical technology of reduction smelting applied to lead cake (~35% Pb) and silicate slag (~22 % Pb), the authors describe the current problems related to the optimization of traditional methods used in complex processing of polymetallic middlings from waste, with non-ferrous metals being turned into marketable products through computer simulation. Objectives: This study aims to look at how the phase composition and the element distribution depend on the primary charge composition, as well as to analyse the possibility of using a thermodynamic study for identifying the optimal composition of the charge used for reduction smelting of lead саke at the site of Electrozinc OJSC (Vladikavkaz) and of silicate slag. Methods Applied: With the help of Outotec’s HSC Chemistry software package, balance calculations were performed for multicomponent equilibrium compositions in a heterogeneous gas–liquid–solid system during the reduction smelting of lead cake and silicate slag. Originality: The original features of this research include simultaneous smelting of lead cake and silicate slag and the use of metal shavings and iron ore, together with coke, as reducing agents, which enable the disposal of industrial waste. Findings: In the process of reduction smelting, it is primarily zinc that reacts to transform into gas, whereas lead, copper and antimony are concentrated within the metal phase. With the optimal composition of the charge, %: 67 – lead саke; 9 – silicate slag; 2 – iron turnings; 3 – limestone; 12 – coke; lead, copper (>99%), most of the antimony (>88 %) and arsenic (>78%) almost completely transform into the metal phase; zinc, together with oxidized iron (~54%), is distributed between the gas phase (~67%) and the speiss-slag phase (~31%). Practical Relevance: Initial data were obtained for optimized reduction smelting of polymetallic wastes and middlings. This will enable to expand the range of lead-containing materials that can be used in end-to-end pyrometallurgical processing to produce marketable products from non-ferrous metals.

Keywords

Melting, cake, mixture, sublimates, slag, matte, metal, lead.

Gennady I. Maltsev – D.Sc. (Eng.), Senior Researcher, Lead Specialist of the Research Center

Uralelectromed JSC, Verkhnyaya Pyshma, Russia. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Konstantin L. Timofeev – Ph.D. (Eng.), Chief of Hydrometallury

Uralelectromed JSC, Verkhnyaya Pyshma, Russia. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Anatoliy I. Popov – Head of Laboratory at the Research Center

Uralelectromed JSC, Verkhnyaya Pyshma, Russia. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

1. Li Y., Su Z., Qiao Q., 2015, Integrated assessment of process pollution prevention and end-of-pipe control in secondary lead smelting, Resources. Conservation and Recycling, In Press, Corrected Proof., Available online 23. 12. 2015.

2. Bai L., Qiao Q., Li Y., 2015, Substance flow analysis of production process: a case study of a lead smelting process, Journal of Cleaner Production, 104, 502–512.

3. De la Campa A. M. S., Sánchez-Rodas D., Castanedo Y.G., 2015, Geochemical anomalies of toxic elements and arsenic speciation in airborne particles from Cu mining and smelting activities: Influence on air quality, Journal of Hazardous Materials, 291, 18–27.

4. Trpčevská J., Hoľková B., Briančin J., 2015, The pyrometallurgical recovery of zinc from the coarse-grained fraction of zinc ash by centrifugal force, International Journal of Mineral Processing, 143, 25–33.

5. Ebin B., Isik M. I., 2016, Chapter 5 – Pyrometallurgical Processes for the Recovery of Metals from WEEE, WEEE Recycling, 107–137.

6. Binnemans K., Jones P. T., Blanpain B., 2015, Towards zero-waste valorisation of rare-earth-containing industrial process residues: a critical review, Journal of Cleaner Production, 99, 17–38.

7. Kazantsev G.F., Barbin N.M., Moiseev G.K., Marshuk L.A., Ivanovskiy L.E., Vatolin N.A. Sposob polucheniya svinca iz otkhodov [Method for recovering lead from waste]. Patent RF, no. 2094509, 1994.

8. Grechko A.V., Kalnin E.I., Besser A.D., Tarasov A.V. Sposob pirometallurgicheskoj pererabotki svinecsoderzhashhih materialov i pech' dlja ego osushchestvlenija [Pyrometallurgical processing of lead-containing materials and the furnace necessary for the process]. Patent RF, no. 2114927, 1997.

9. Nauchno-tehnicheskij otchet o vypolnenii 5 etapa Gosudarstvennogo kontrakta № 16.740.11.0522 ot 16.05.2011 [Technical report on the implementation of the 5th stage of Public Contract No. 16.740.11.0522 dated 16 May 2011]. UrFU named after the first President of Russia B.N. Eltsin; Project leader: S.V. Karelov. GRNTI 53.37.13. Ekaterinburg, 2013, 125 p.

10. Torres C. M., Taboada M. E., Graber T. A., 2015, The effect of seawater based media on copper dissolution from low-grade copper ore, Miner. Eng., 71, 139–145.

11. Puts G. J., Crouse P. L., 2014, The influence of inorganic materials on pyrolysis of polytetrafluoroethylene. Pt. 1: The sulfates and fluorides of Al, Zn, Cu, Ni, Co, Fe, and Mn, J. Fluorine Chem., 168, 260–267.

12. Sundman B., Lu X.-G., Ohtani H., 2015, The implementation of an algorithm to calculate thermodynamic equilibria for multi-component systems with non-ideal phases in a free software, Comput. Mater. Sci., 101, 127–137.

13. Littlejohn P., J. Vaughan J., 2012, Selectivity of commercial and novel mixed functionality cation exchange resins in mildly acidic sulfate and mixed sulfate-chloride solution, Hydrometallurgy, 121-124, 90–99.