ISSN (print) 1995-2732
ISSN (online) 2412-9003

 

download

Abstract

Materials on the base of multifunctional alloys with the special physical and mechanical properties for developing the equipment of new generation are in high demand at present. Among these materials are Invar alloys with the minimum thermal expansion and the increased level of mechanical properties, in particular, strength ((c) hardness (HV). Such materials are necessary for creating the components of navigation systems (accelerometers, gyroscopes), sensors of small displacements, laser technology (adjustment units, mirror), antennas, waveguides, etc. The results of complex research of innovative high-strength multifunctional invar class alloys are presented. The effect of thermal treatment on the formation of structure and physical and mechanical properties of alloys in terms of iron nickel alloys, carbon, cobalt and vanadium is shown. Relating to the conditions of OJSC Motovilikhinskiye zavody the base industrial technology of the production of the nano-structured billets of the multifunctional alloys of new generation has been developed. This technology ensures to achieve the increased level of mechanical strength (σв1100 MPa) and anomalously low values of the thermal linear expansion coefficient (1∙10-6К-1).

Keywords

Feature-rich alloys, high-strength invar, durability, treatment, deformation, Gleeble 3500.

Chukin Mihail Vitalevich – D.Sc. (Eng.), Professor, First Vice-Rector-Vice Rector for Science and Innovation, Nosov Magni-togorsk State Technical University, Russia. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

Golubchik Eduard Mikhailovich – Ph.D. (Eng), Associate Professor, Nosov Magnitogorsk State Technical University, Russia. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

Gun Gennadij Semenovich – D.Sc. (Eng.), Professor, Advisor to the Rector, Nosov Magnitogorsk State Technical University, Russia. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

Koptseva Natalia Vasilyevna – D.Sc. (Eng.), Professor, Nosov Magnitogorsk State Technical University, Russia. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

Efimova Yuliya Yuryevna – Ph.D. (Eng), Associate Professor, Nosov Magnitogorsk State Technical University, Russia. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

Chukin Dmitriy Mikhajlovich – Postgraduate Student, Nosov Magnitogorsk State Technical University, Russia.

Matushkin Aleksej Nikolaevich – Director of the Plant of Precision Alloys, OJSC Motovilikhinskiye zavody, Perm, Russia.

References

1. Kolokoltsev V.M., Chukin M.V., Golubchik E.M., Rodionov Yu.L., Bukhvalov N.Yu. Osvoenie novyh tehnologij proizvodstva mnogofunkcional’nyh splavov invarnogo klassa s povyshennymi ekspluatacionnymi svojstvami [Development of new technologies for the production of multifunctional alloy invarnogo class with elevated performance properties]. Metallurgiheskie processy i oborudovanie [Metallurgical processes and equipment]. 2013, no. 3, рр. 47-52.

2. Chukin M.V., Golubchik E.M., Kuznetsova A.S., Rodionov Yu.L., Korms I.A., Kasatkin A.V., Poduzov D.P. Razrabotka kompozicij mnogofunkcional’nyh splavov invarnogo klassa s rassirennymi ekspluatacionnymi harakteristikami. [Development of multifunctional alloy invarnogo class compositions with enhanced performance]. Vestnik Magnitogorskogo Gosudarstvennogo Tehnicheskogo Universiteta im. G.I. Nosova [Vestnik of Nosov Magnitogorsk State Technical University]. 2013, no. 3, рр. 62-66.

3. Kolokoltsev V.M., Chukin M.V., Gun G.S., Bukhvalov N.Yu., Golubchik E.M., Kuznetsova A.S., Pustovoyt K.S. Organizaciya malotonnazhnogo proizvodstva nanostrukturirovannyh zagotovok iz mnogofunkcional’nyh splavov so special’nymi svojstvami [Organization of small tonnage production of multifunctional nanostructured alloys with special properties]. Trudy IX kongressa prokatchikov [Proceedings of the IX Congress rolling]. vol. 1. Cherepovets, RUSSIAN STATE UNIVERSITY CSU. 2013, рр. 248-251.

4. Rodionov Yu.L., Serbedinskij G.V., Maksimova O.P., Yudin V.I. Vysokoprochnye invarnye splavy [High-strength alloys /invar]. Stal’ [Steel]. 2000, no. 5, pp. 76-80.

5. Rodionov Y.L., Mogutnov B.M., Shaposhnikov N.G., Korms I.A., Pozdnyakov V.A., Mishanin S.V., Malinov V.I. Alloys with thermal expansion matching to electrolyte materials for solid oxide fual cells. International Journal of Materials Research. July, 2010, pp. 907-913.

6. Silman G.I. Compilative Fe-Ni phase diagram with authour’s correction. Metal Science and Heat Treatment, July, 2012, vol. 54, no. 3-4, pp. 105-112.

7. Grachev S.V., Filippov M.A., Chermenskii V.I., Kharchuk M.D., Konchakovskii I.V., Zhilin A.S., Tokarev V.V., Nikiforova S.M. Thermal properties and structure of cast carbon-containing invar and superinvar alloys after two-stage annealing. Metal Science and Heat Treatment, July, 2013, vol. 55, no. 3-4, рр. 124-128.

8. Сhukin M.V., Korchunov A.G., Gun G.S., Polyakova M.A., Koptseva N.V., Nanodimentional structural part formation in high carbon steel by thermal and deformation process. Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta im. G.I. Nosova. [Vestnik of Nosov Magnitogorsk State Technical University]. 2013, no. 5, рр. 33-36.

9. Chukin M.V., Gun G.S., Korchunov A.G., Polyakova M.A. Perspektivy proizvodstva vysokoprochnoj stal’noj armatury iz vysokouglerodistyh marok stali [Prospects of production of high-strength steel reinforcement of high-carbon steel]. Chernye metally [Non-ferrous metals]. December, 2012, pp. 8-15.

10. Chukin M.V., Gun G.S., Golubchik E.M., Kuznetsova A.S., Bukhvalov N.Yu. Realizacia proekta malotonnazhogo proizvodstva nanostrukturirovannyh za-gotovok iz mnogofunkcional’nyh splavov so special’nymi svojstvami [Realization of the project of small tonnage production of multifunctional nanostructured alloys with special properties]. XIV International scientific conference «New technologies and achievements in metallurgy and materials engineer-ing. A collective monograph edited by Prof. dr HAB. inz. Henrek Dyja, dr HAB. inz. Anna Kawalek, Prof. PCz. Chapter 1. Series: Monografie Nr 24. Polish. Czestochowa, 2013, pp. 374-379.

11. Chukin D.M., Ishimov A.S., Jerebcov M.S. Ispol’zovanie kompleksa Gleeble 3500 dla analiza fazovyh prevrasenij v stali èvtektoidnogo sostava, mikrolegirovannoj borom [Gleeble 3500 using complex analysis of phase transformations in steel èvtektoidnogo, mikrolegirovannoj with boron]. Obrabotka splosnyh i sloistyh materialov: mezvuz. sb. nauch. tr. / Pod red. M.V. Chukina [Processing of solid and laminated materials: Proceedings of the collected works. Ed. M.V. Chukin]. Magnitogorsk: Nosov Magnito-gorsk State Technical University, 2012, no. 38, pp. 53-57.