ISSN (print) 1995-2732
ISSN (online) 2412-9003

 

download PDF

Abstract

Steels go through several processing steps to reach the desired state of delivery. Properties and quality of stainless steel are mainly determined by the quality of the product surface. In high temperature processes, such as annealing, rolling and forging, scale layers of 5 to 10 µm thickness consisting of oxides and oxide hydrates are formed on the steel surface. Furthermore, underneath the scale layer the chromium content of the alloy is depleted by diffusion effects, leading to reduced chemical stability. Thus, the chemical removal of both the scale layer and the chromium depleted layer in pickling processes is a fundamental step to achieve clean and homogeneous surfaces. Most of the steels are pickled at least once, usually several times. Strong mineral acids are commonly applied as pickling media. For stainless steel pickling, usually mixtures of nitric acid and hydrofluoric acid – so called mixed acids - are applied. Due to the chemical reaction, an enrichment of the pickling medium with detached scale particles, dissolved metal salts (bound acid), as well as a depletion of active acid (free acid) takes place. In this way, the pickling medium loses its effectiveness and must be replaced or refreshed. This causes significant emissions of acidic waste streams, which need to be treated to comply with regulations. The waste streams contain considerable amounts of dissolved heavy metals, nitrates, and free acid. Commonly, precipitation neutralization is applied; however, this leads to a loss of the dissolved valuables. Furthermore, significant amounts of neutralization sludge are generated, which need to be disposed of, as they constitute hazardous wastes. For both environmental and economic reasons the loss of valuables should be avoided. For this reason, pickling media are continuously regenerated in modern pickling lines. The focus may be on acid recovery only - this is referred to as partial regeneration - or on a combined acid and metal recovery - this is referred to as total regeneration.

Keywords

Stainless steel finishing, pickling, acid pickling, scale removal, acid recovery, metal recovery.

Rögener F. Institute of Chemical Process Engineering and Plant Design, TH Köln, Germany

Lednova Yu.A., Andrianova M.Yu. Peter the Great St.Petersburg Polytechnic University, St. Petersburg, Russia

Lednov A.V. Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia

1. R. Kirchheim, B. Heine, H. Fischmeister, S. Hofmann, H. Knote, U. Stolz: The passivity of iron-chromium alloys. Corros. Sci. 29 (1989) 899–917.

2. D.M. Price, G.L. Horter: Waste minimization in stainless steel pickling solutions: A study to model dissolution kinetics of the chromium-depleted surface. Metal Finishing 2 (1994) 60–65.

3. A. W. Loginow, J. F. Bates: Influence of Alloying Elements on the stress corrosion behavior of austenitic Stainless Steel, Corrosion 25 No. 1 (1969) 15–22.

4. D.P. Moon: Role of reactive elements in alloy protection. Materials Science and Technology 5 No. 8 (1989) 754-764.

5. T.A. Mamvura, S. E. Iyuke, J. D. Cluett and A. E. Paterson: Soil Films in the Beverage Industry: A Review. J. Inst. Brew. 117 No. 4 (2011) 608–616.

6. E.A.Kenik, J.T.Busby, M.N.Gussev, P.J.Maziasz, D.T.Hoelzer, A.F.Rowcliffe, J.M.Vitek: Structure and mechanical properties of improved cast stainless steels for nuclear applications. Journal of Nuclear Materials 483 (2017) 35–43.

7. H. Kim, H. Jang, G. O. Subramanian, C. Kim, C. Jang: Development of alumina-forming duplex stainless steels as accident-tolerant fuel cladding materials for light water reactors. Journal of Nuclear Materials 507 (2018) 1–14.

8. T. J. Mesquita, E. Chauveau, M. Mantel, N. Bouvier, D. Koschel: Corrosion and metallurgical investigation of two supermartensitic stainless steels for oil and gas environments. Corrosion Science 81 (2014) 152–161.

9. M. Corradi, A. Di Schino, A. Borri, R. Rufini: A review of the use of stainless steel for masonry repair and reinforcement. Construction and Building Materials 181 (2018) 335–346.

10. D. Addari, B. Elsener, A. Rossi: Electrochemistry and surface chemistry of stainless steels in alkaline media simulating concrete pore solutions. Electrochimica Acta 53 (2008) 8078–8086.

11. A. Fattah-alhosseini, S. Vafaeian: Passivation behavior of a ferritic stainless steel in concentrated alkaline solutions. Journal of Materials Research and Technology Volume 4, Issue 4, (2015) 423–428.

12. R.C. Makkus, A.H.H. Janssen, F.A. de Bruijn, R.K.A.M. Mallant: Use of stainless steel for cost competitive bipolar plates in the SPFC]. J Power Sources, 86 (1–2) (2000), pp. 274–282.

13. H. Wang, J.A. Turner: Ferritic stainless steels as bipolar plate material for polymer electrolyte membrane fuel cells J Power Sources, 128 (2) (2004) 193–200.

14. http://www.worldstainless.org/Files/issf/non-image-files/PDF/ISSF_Stainless_Steel_in_Figures_2018_English_Public.pdf. (Accessed: 04.08.18).

15. C.O.A. Olsson, D. Landolt: Passive Films on Stainless Steels: Chemistry, Structure and Growth. Electrochimica Acta 48 (2003) 1093–1104.

16. D. Henriet: Stainless steel surface treatments. pp. 823–847. In: P. Lacombe, B. Baroux, G. Beranger (edits.): Stainless Steels. Les Editions de Physique, Les Ulis Cedex A, France, 1993.

17. A. Bornmyr, J. Toesch, F. Winkler: Pickling Handbook - Surface treatment of stainless steels, 2nd edit., Centrumtryck, Sweden, 2009.

18. D. Lindell, R. Pettersson: Pickling of process-oxidised austenitic steels in HNO3-HF mixed acid. Steel Research Int. 81 (2010) 542–551.

19. W. Fredriksson, S. Malmgren, T. Gustafsson, M. Gorgoi, K. Edström: Full depth profile of passive films on 316L stainless steel based on high resolution HAXPES in combination with ARXPS. Applied Surface Science 258 (2012) 5790–5797.

20. R. Rituper: Beizen von Metallen, Leuze Verlag, Saulgau (1993).

21. B.S. Covino, J.V. Scalera, T.J. Driscoll, J.P. Carter: Dissolution behaviour of 304 stainless steel in HNO3/HF mixtures. Metall Trans A 1986;17A:137–49.

22. L.F. Li, P. Caenen, M. Daerden, D. Vaes, G. Meers, C. Dhondt, et al.: Mechanism of single and multiple step pickling of 304 stainless steel in acid electrolytes. Corros Sci.47 (2005) 1307–1324.

23. D.P. Whittle, G.C. Wood: Complex scale formation on an iron-18% chromium alloy. J. Electrochem Soc 114 (1967) 986–993.

24. J.B. Stephenson, G.L. Horter, H.H. Dewing: Iron removal and the complexity of stainless steel pickling liquors, in J.E. Dutrizac, A.J. Monhemius: Iron control in hydrometallurgy, Ellis Horwood Ltd., 571–581, Chichester 1986.

25. J.B. Stephenson, J.C. Hogan, R.S. Kaplan: Recycling and Metal Recovery Technology for Stainless Steel Pickling Liquors. Environmental Progress 3 No. 1 (1984) 50–53.

26. F. Mancia: Treatment plant for continuous regeneration of stainless steels exhaust pickling solutions based on HNO3-free process, European Comission contract No. 7215-PP/003, Final Report, Brussels 2002.

27. L. Narvaez, E. Cano, J.M. Bastidas: Effect of ferric ions in AISI 316L stainless steel pickling using an environmentally friendly H2SO4-HF-H2O2 mixture, Materials and Corrosion 54 (2003) 84–87.

28. N.Y. Ghare, K.S. Wani, V.S. Patil: A review on methods of recovery of acid(s) from spent pickle liquor of steel industry. Journal of Environmental Science & Engineering 55 (2) (2013) 253–266.

29. F. Rögener, M. Sartor, A. Bán, D. Buchloh, T. Reichardt: Metal recovery from spent stainless steel pickling solutions. Resources, Conservation and Recycling 60 (2012) 72–77.

30. [M. Regel-Rosocka: A review on methods of regeneration of spent pickling solutions from steel processing 2010.

31. J.L. Gálvez, J. Dufour, C. Negro, F. López-Mateos: Fluoride Speciation in Stainless Steel Pickling Liquor. ISIJ International 46 No. 2 (2006) 281–286.

32. [A. Singhal, V.K. Tewari, S. Prakash: Characterization of stainless steel pickling bath sludge and its solidification/stabilization. Building and Environment 43 (2008) 1010–1015.

33. M. Ito, R. Tachibana, K Fukushima, Y. Seino, A. Yamamoto, Y. Kawabata: Characteristics and production mechanism of sulfuric acid and nitric-hydrofluoric acid pickling sludge produced in manufacture of stainless steel. Journal of Chemical Engineering of Japan 31(4) (1998) 589–595.

34. http://www.eco-tec.com/techpapers/TP%20147%20Mixed%20Acid.pdf. (Accessed: 04.08.18).

35. http://www.scanacon.com/en-us/home/ (Accessed: 04.08.18).

36. A. Agrawal, K.K. Sahu: An overview of the recovery of acid from spent acidic solutions from steel and electroplating industries. Journal of Hazardous Materials 171 (2009) 61–75.

37. Mixed acid recovery with the APU acid sorption system, ECO TEC Technical paper 147 (1997) (Accessed: 04.08.18).

38. http://www.scanacon.com/en-us/products/overview/acid-solids-separation/ (Accessed: 04.08.18).

39. https://engineering.steuler.com/en/acid-regeneration (Accessed: 19.08.18).

40. http://www.scanacon.com/en-us/products/overview/acid-solids-separation/ (Accessed: 19.08.18).

41. F. Rögener, D. Buchloh, T. Reichardt, J. Schmidt, F. Knaup: Total regeneration of mixed pickling acids from stainless steel processing. Stahl und Eisen 10 (2009) 69–73.

42. A. Deuschle, Diffusion dialysis – an economical technology for recovery of acids from pickling processes, in: Report, OSMOTA Membrantechnik GmbH, Germany, 1992.

43. D. Baley: Recycling of pickle liquor with diffusion dialysis. Stainless Steel Nov./Dec. (2003) 10–11.

44. [http://www.purecycle.com/right.html (Accessed: 18.08.18).

45. Sturm, W.: Rückgewinnung von Rohstoffen und Wasser aus Abwässern am Beispiel chemischer Oberflächenbehandlungsanlagen; Proceedings: Colloquium Produktionsintegrierter Umweltschutz, 2./4.09.1996, Bremen.

46. Oh, S.J.; Moon, S.-H.; Davis, T.: Effects of metal ions on diffusion dialysis of inorganic acids, Journal of Membrane Science 169 (2000) 95–105.

47. Z. Palaty, A. Zakova: Transport of nitric acid through the anion exchange membrane Neosepta-AFN, Desalination 160 (2004) 51–66.

48. W. Kun, W. Wei and X. Wei-hong, Recovery of nitric acid from picking solution of steels by diffusion dialysis. Membrane Science and Technology 6 (2010) 62–65. (In Chinese).

49. Recovery of stainless steel pickle liquors: Purification vs. Regeneration, ECO TEC Technical Paper 158 (2002). http://www.eco-tec.com (Accessed: 10.09.18).

50. Rapp, H.-J.: Säureaufbereitung in kombinierten Prozessen mit Elektrodialyse; Preprints: 8. Aachener Membrankolloquium, 27./29.03.2001, Aachen.

51. H.J. Rapp, F. Rögener, M. Sartor, T. Reichardt: Regeneration of stainless steel pickling solutions by a multi-stage process consisting of retardation, electrodialysis and membrane electrolysis. Filtech 2009, Preprints Vol. II 521–528, Wiesbaden (2009).

52. Ошибка! Источник ссылки не найден..

53. J.B. Stephenson, G.L. Horter, H.H. Dewing: Iron removal and the complexity of stainless steel pickling liquors, in J.E. Dutrizac, A.J. Monhemius: Iron control in hydrometallurgy, Ellis Horwood Ltd., 571-581 Chichester 1986.

54. L.A. Fernando: Solution chemistry of HNO3/HF pickle mixtures, Metallurgical Transactions B, Vol. 21B (1990) 5-9.

55. R.G. Reddy, S. Wang, B. Chen: Solubility of iron in spent pickling solutions, Minerals & Metallurgical Processing 102 (1993) 102–107.

56. D.M. Price, G.L. Horter: Waste minimization in stainless steel pickling solutions: A study to model dissolution kinetics of the chromium-depleted surface, Metal Finishing Febr. (1994) 60–65.

57. Per Nymark: Picked Recycling of Nitric Acid from Waste Pickling Acid by Electrodialysis. EU research project LIFE00 ENV/S/000853 http://ec.europa.eu/environment/ life/project/Projects/index.cfm?fuseaction=search.dspPage&n_proj_id=1853&docType=pdf (Accessed: 19.08.2018).

58. G. Pourcelly: Electrodialysis with Bipolar Membranes: Principles, Optimization, and Applications. Russian Journal of Electrochemistry, Vol. 38, No. 8 (2002) 919–926. From Elektrokhimiya, Vol. 38, No. 8 (2002) 1026–1033.

59. C. Negro, M.A. Blanco, F. Lopez-Mateos, A.M.C.P. DeJong: Free acids and chemicals recovery from stainless steel pickling baths. Sep. Sci. Technol. 36 (2001) 1543–1556.

60. F. Baerhold, J. Starcevic, K. Reichert: Reduction of nitrates in stainless steel pickling. Millennium Steel 2006. 238–239.

61. W. Wukovits, W. Kamer, A. Lebl, M. Harasek, A. Friedl: Simulation and optimization of the reactive absorption of HF/HNO3 during pickling acid regeneration. In: S. Pierucci (Editor): European Symposium on Computer Aided Process Engineering – 10; 2000, 919–924.

62. W. F. Kladnig: New Development of Acid Regeneration in Steel Pickling Plants. Journal of iron and steel research, International. 15 No. 4 (2008) 01–06.

63. D. Mayr, L. Coronardo: Processes for acid-recovery of pickling and oxide quality improvement for the steel industry SEASI Quaterly 32 (2003) 28–36.

64. F. Rögener, D. Buchloh, T. Reichardt, J. Schmidt, F. Knaup: Total regeneration of mixed pickling acids from stainless steel production. Stahl und Eisen 10 (2009) 69–73

65. T. Watanabe, M. Hoshino, K. Uchino, Y. Nakazato: A New Acid and Iron Recovery process in Stainless Steel Annealing and Pickling Line. Kawasaki Steel Technical report No. 14 (March 1986) 72-82.

66. T. Koivunen: Stainless steel pickling acid recovery, Metallurg. Plant Technol. 1 (1987) 65–66

67. C. McArdle, J.A. Piccari, G.G. Thornburg: AQUATECH Systems‘ pickle liquor recovery process – Washington Steel reduces waste disposal costs and liability, Iron and Steel Engineer 68 No. 5 (1991) 39–43.