ISSN (print) 1995-2732
ISSN (online) 2412-9003

 

download

Abstract

This article presents the main technical-economic, technological and qualitative characteristics of sinter production at the "Ural Steel" Joint Stock Company. According to technical reports on the sintering shop operation, the performance of sinter production and quality of sinter have been evaluated. The main technical and technological factors limiting the performance of sinter production at the "Ural Steel" Joint Stock Company have been determined. The article contains a critical review of the known methods improving efficiency of the sintering process with due regard to the profile of the existing sinter production. The authors propose a priority method for improving the sinter output produced at the "Ural Steel" Joint Stock Company suggesting that mineral additives promoting pelletizing and accelerating mineral formation during sintering should be used in the sinter charge. This option of sintering process improvement fosters an integrated effect on the sinter charge preparation, flow of the sintering process, and does not require any significant adjustment of technology and equipment. It makes most sense to use local resources such as Orsk-Khalilov brown iron ore deposits, Khalilov serpentinite deposits, and Novokievsk and Voskresensk bentonite clay deposits as mineral additives in the setting of the "Ural Steel" Joint Stock Company. The article presents data on the chemical and mineralogical composition of these materials. Based on these data, conclusions on the behavior of mineral additives during sintering have been drawn. Laboratory experiments have substaintiated positive effects of these additives on the progress and results of sintering. In addition, their inclusion in the production process will lower transportation costs, solve environmental problems of open deposits in the region, and ensure a comprehensive use of mineral resources in the Orenburg region. To ensure a sustainable use of mineral additives, it is necessary to supply them with water when moistening the sinter charge into slurry, which will ensure their valuable contribution to sintering charge pelletization and sintering.

Keywords

Sinter charge, pelletizing, sintering, brown iron ore, bentonite clay, serpentinite.

 

Ganin Dmitriy Rudolfovich – engineer, Novotroitsk branch of the National University of Science and Technology ‘MISIS’, Novotroitsk, Russia. Phone: +7(3537)67-96-07. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..
Druzhkov Vitaliy Gavrilovich – Ph.D. (Eng.), Associate Professor, Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia. Phone: +7(3519)29-84-30.
Panychev Anatoly Alekseevich – Ph.D. (Eng.), Chief Specialist on Natural Resources, "Ural Steel" Joint Stock Company, Novotroitsk, Russia. Phone: +7(3537)66-28-09. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..
Shapovalov Aleksey Nikolaevich – Ph.D. (Eng.), Associate Professor, Head of the Department of Metallurgical Technologies and Equipment, Novotroitsk branch of the National University of Science and Technology ‘MISIS’, Novotroitsk, Russia. Phone: +7(3537)67-96-07. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..
  1. Shapovalov A.N., Ovchinnikova E.V., Maistrenko N.A. Povyshenie kachestva podgotovki aglomeratsionnoi shikhty k spekaniyu v usloviakh OAO «Uralskaya stal» [Improving Quality of Sinter Charge Preparation at the Ural Steel" Joint Stock Company]. Metallurg [Мetallurgist]. 2015, No. 3, pp. 30-36.
  2. Efimenko G.G., Gimmelfarb A.A., Levchenko V.E. Metallurguia chuguna [Ironmaking]. Kiev: Vyshcha shkola, 1988, 351 p.
  3. Baptizmansky V.I. and others. Osnovy nauchnykh issledovanii v chiornoi metallurguii [Research basics in ferrous metallurgy]. Kiev, Donetsk: Vyshcha shkola, 1985, 205 p.
  4. Korotich V.I., Frolov Yu.A., Bezdezhsky G.N. Aglomeratsiia rudnykh materialov [Sintering of ore-bearing materials]. Ekaterinburg: GOU VPO «UGTU-UPI», 2003, 400 p.
  5. Ptichnikov A.G., Barinov V.Kh., Kazantsev E.A., Demin V.V., Frolov Yu.A. Povyshenie effektivnosti raboty aglofabriki OAO «ChMK» [Improving the efficiency of the sinter plant ‘Chelyabinsk Metallurgical Plant’ OJSC]. Stal' [Steel], 2011, no. 7, pp. 6-14.
  6. Panychev A.A. Issledovaniia obogashcheniia prirodno-legirovannogo syria dlya proizvodstva neftegazovykh trub v severnom ispolnenii [Research on the concentration of naturally-alloyed raw materials for the production of pipes for arctic service]. Moskva: Izdatelskii dom «Ruda i metally», 2001, 112 p.
  7. Bratkovsky E.V., Shapovalov A.N., Babanakov V.V. and others. Osobennosti vyplavki prirodnolegirovannykh chugunov [Melting patterns of naturally-alloyed cast iron]. Orenburg: RIK GOU OGU, 2004, 198 p.
  8. Shapovalov A.N., Zavodyany A.V. Ispolzovanie bentonitovykh glin Voskresenskogo mestorozhdenia dlya proizvodstva zhelezorudnykh okatyshei [Use of Bentonite Clays of the Voskresensk Deposit to Produce Iron-Ore Pellets]. Metallurg [Мetallurgist]. 2014, no. 5, pp. 40-43.
  9. Shapovalov A.N., Zavodyany A.V., Bratkovsky E.V. Primenenie serpentinitomagnezitov Khalilovskogo mestorozhdenia v aglomeratsionnom proizvodstve. [Application of serpentine-magnesites of the Khalilovo deposit in sintering]. Izvestiya vysshikh uchebnyh zavedenij. Chernaya metallurgiya [News of the higher educational institutions. Ferrous metallurgy]. 2011, no. 3, pp. 25-29.
  10. Panychev A.A., Ganin D.R., Nikonova A.P. Sposob aglomeratsii zhelezorudnykh materialov [Agglomeration method of iron-ore materials]. Patent RF, no. 2471005, 2012.
  11. Pazhi D.G., Galustov V.S. Osnovy tekhniki raspylivaniia zhidkostei [Basics of liquids atomization techniques]. Мoscow: Khimiya, 1984, 256 p.