ISSN (print) 1995-2732
ISSN (online) 2412-9003

 

download

Abstract

This article presents analytical dependences of calculations of power conditions of continuous extrusion by the conform process and analyzes the influence of the design parameters of the tool and deformation process conditions on power parameters of the conform process. For the first time the article considers parameters of a deformation zone and rheology of deformed steel to determine the pressing force. By applying the calculated dependences, the authors developed an algorithm to calculate changes in power conditions of continuous ex-trusion by the conform process, which was implemented in Microsoft Exel, determining power conditions during extrusion for discrete input of source data. A practical appliction of the solution in practice requires no special training of technical personnel, makes it possible to analyze the influence of main process parameters on changes in power conditions of continuous extrusion by the conform process to develop an optimal production technology for steel sections or create a PCS.

Keywords

Continuous extrusion by the conform process, analysis of power conditions of deformation.

Belyaev Sergey Vladimirovich – D.Sc. (Eng.), Associate Professor, Head of the Foundry Engineering Department, the Institute of Non-Ferrous Metals and Materials Science, Siberian Federal University, Krasnoyarsk, Russia. Phone: +7 (391) 213-36-21. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

Bogdanov Dmitry Vladimirovich – Postgraduate Student, Siberian Federal University, Krasnoyarsk, Russia.

Gubanov Ivan Yurievich – Ph.D. (Eng.), Associate Professor, Siberian Federal University, Krasnoyarsk, Russia.

Gorokhov Yuri Vasilievich – D.Sc. (Eng.), Professor, Siberian Federal University, Krasnoyarsk, Russia.

Krokhin Alexander Yurievich – Project Manager of LLC RUSAL R&D Centre, Krasnoyarsk, Russia.

Frolov Viktor Fedorovich – Project Manager of LLC RUSAL R&D Centre, Krasnoyarsk, Russia.

Kostin Igor Vladimirovich – Postgraduate Student, Siberian Federal University, Krasnoyarsk, Russia.

1. Gorokhov Yu.V., Sherkunov V.G., Dovzhenko N.N. et al. Osnovy proektirovaniya protsessov nepreryvnogo pressovaniya metallov: monografiya [Basics of designing processes of continuous extrusion of metals: a monograph]. Krasnoyarsk: Siberian Federal University, 2013, 268 p.

2. Kornilov V.N. Nepreryvnoe pressovanie so svarkoj alyuminievykh splavov [Continuous extrusion with welding of aluminum alloys]. Krasnoyarsk: Publishing House of the Pedagogical Institute, 1993, 216 p.

3. Perlin I.L., Raitbarg L.Kh. Teoriya pressovaniya metallov [Theory of metal pressing]. Moscow: Metallurgy, 1975, 448 p.

4. Shcherba V.N., Raitbarg L.Kh. Teoriya pressovaniya metallov [Technology of metal pressing]. Moscow: Metallurgy, 1995, 336 p.

5. Sergeyev V.M., Sherkunov V.G., Gorokhov Yu.V. et al. The calculation of the optimum geometry of the tool during continuous extrusion. Metally [Metals]. 1990, no. 4, pp. 183-188.

6. Dovzhenko N. N., Sidelnikov S.B., Vasina G.I. Sistema avtomatizirovannogo proektirovaniya tekhnologii pressovaniya metallov. Nauchnoe metodicheskoe obespechenie: monografiya [A computer-aided design of metal pressing technology. Scientific methodological support: a monograph]. Krasnoyarsk: GATsMiZ, 2000, 196 p.

7. Ermanok M.Z., Feigin V.I., Sukhorukov N.A. Pressovanie profilej iz alyuminievykh splavov [Extrusion of aluminum alloy sections]. Moscow: Metallurgy, 1977, 264 p.

8. Dovzhenko N.N., Sidelnikov S.B., Peshchansky A.S. et al. Automation of the aluminum alloy section extrusion process and its application in an industrial environment. Vestnik Magnitogorskogo Gosudarstvennogo Tekhnicheskogo Universiteta im. G.I. Nosova [Vestnik of Nosov Magnitogorsk State Technical University]. 2011, no. 2, pp. 39-42.