Okulov R.A., Parshin S.V. The significance of the back tension usage in cross-sectional tube drawing process

Abstract

The article is devoted to the problem of current interest that is the study of resulting products geometry and power parameters of the drawing process dependence on the use of back tension force. The work was performed by the software using the finite element method and was practically experimented. The results of theoretical and practical parts are in good agreement. As a result of this work the required dependencies have been defined and valuable recommendations to producers have been given.

Keywords

Drawing, back tension, steel X6CrNiTi18-10, cross-sectional tube.

Okulov Roman Alexandrovich – Postgraduate Student, Ural Federal University named after the first President of Russia B.N. Yeltsin, Yekaterinburg, Russia. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

Parshin Sergei Vladimirovich – D.Sc. (Eng.), Professor, Ural Federal University named after the first President of Russia B.N. Yeltsin, Yekaterinburg, Russia. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

1. Perlin I.L., Ermanok M.Z. The theory of drawing. Moscow, 1971, 448 p.

2. Danchenko V.N., Sergeev V.V., Nikulin E.V. Production of shaped pipes. Moscow: Intermet Engineering, 2003, 224 p.

3. Orlov G.A., Vagapov E.N., Chernyshev D.U., Popov D.A. Some of the technological capabilities of the roller tube drawing. Production of steel. 2012, no. 4, pp. 28-31.

4. Bogatov A.A., Mizhiritsky O.I., Smirnov S.V. Resource ductility metal processing pressure. Moscow: Metallurgy, 1984, 144 p.

5. Okulov R.A., Parshin V.S., Karamyshev A.P. Energy intensity of treatment rivet wire drawing of duralumin and radial compression. Bulletin of mechanical engineering. 2012, no. 9, pp. 80-81.

Details: Published: 18 September 2015; Last Updated: 18 September 2015; Hits: 1954