Antsupov V.P., Dvornikov L.T., Gromakovskii D.G., Antsupov A.V. (jun.), Antsupov A.V. Fundamentals of physical theories reliability of machine parts on criteria kinetic strength of materials

Abstract

The main principles of the theory of reliability prediction of mechanical systems loaded elements in the stage of design development, underlying the creation of methodology for formulating and solving boundary value problems for project evaluation of reliability and durability criteria for kinetic strength of materials were stated. The example of the implementation methodology for project analysis and justification reconstruction drive rotation of the kiln for clinker production unit, which is integrated in the industrial production of OJSC «MCRP» among OJSC «MMK» group, is shown.

Keywords

Theory, basics, kinetic strength, methodology, forecasting, reliability, dependability, durability, failure, damage susceptibility, gamma-percent life.

Antsupov Victor Petrovich – D.Sc. (Eng.), Professor, Nosov Magnitogorsk State Technical University, Russia. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

Dvornikov Leonid Trofimovitch – D.Sc. (Eng.), Professor, Head of the Theory of Mechanisms and Machine Elements De-partment, Siberian State Industrial University. Phone: 8(3843)46-57-91. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Gromakovskii Dmitry Grigorievich – D.Sc. (Eng.), Professor, Director of Science and Technology center «Reliability tech-nology, energy and transport vehicles», Samara State Technical University. Phone: 8(8463)32-19-31. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Antsupov Alexei Viktorovich – Ph.D. (Eng), Associate Professor, Nosov Magnitogorsk State Technical University, Russia. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

Antsupov Alexander Viktorovich – C Ph.D. (Eng), Associate Professor, Nosov Magnitogorsk State Technical University, Rus-sia. Phone: 8(3519)24-85-19. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

References

1. Reliability engineering products: practical guidance on standardization, validation and maintenance. Мoscow: Publisher standards, 1990. 328 p.

2. Pronikov A.S. Parametricheskaya nadezhnost mashin [Machine parametric safety]. Moscow: Publishing House of the MSTU N.E. Bauman, 2002. 560 p.

3. Dvornikov L.T., Turov V.A. Composition and structure properties of reliability. Fiziko-tehnicheskie problemyi razrabotki poleznyih iskopaemyih [Physical and technical problems of mining]. 1988. no. 5.

4. Dvornikov L.T., Turov V.A. Features design reliability. Standartizatsiya i upravlenie kachestvom: Ekspress-informatsiya KirgizNIINTI [Standardization and quality management: Express Information KirgizNIINTI]. Frunze, 1989, Iss. I.

5. Dvornikov L.T., Turov V.A. Assessing the level of reliability of hydraulic drilling rigs at the design stage. Fiziko-tehnicheskie problemyi razrabotki poleznyih iskopaemyih [Physical and technical problems of mining]. 1986, no. 6, pp. 62-67.

6. Bakirov M.B., Gromakovskii D.G., Dynnikov A.V. etc. Diagnosis and assessment of the state of residual life of machines and structures. Kontrol. Diagnostika [Control. Diagnostics]. 2004, no. 1, p. 26.

7. Regel V.R., Slutsker A.I., Tomaszewski E.E. Kineticheskaya priroda prochnosti tverdyih tel [The kinetic nature of the strength of solids]. Moscow: 1974, 560 p.

8. Fedorov V.V. Kinetika povrezhdaemosti i razrusheniya tverdyih tel. [Kinetics of solid damageability and break-down]. Tashkent: Publishing House «Fan» UzSSR, 1985, 165 p.

9. Gromakovskii D.G. Destruction surfaces in friction and wear and development of a kinetic model of wear. Vestnik mashinostroeniya [Bulletin of engineering]. 2000, no. 1, p. 3.

10. Gromakovskii D.G., Silaev B.M., Logvinov L.M. Problems of development thermofluctuational models wear surfaces. Trenie i smazka v mashinah i mehanizmah [Friction and lubrication in machinery]. 2009, no. 6, pp. 45-48.

11. GOST 20911-89. Tehnicheskaya diagnostika. Terminyi i opredeleniya. [Technical diagnostics. Terms and definitions]. Мoscow: Publisher standards, 1990, 10 p.

12. Antsupov A.V. Methodology of maschine elements’ reliability prediction by means of various criteria / A.V. Antsupov, A.V. Antsupov (jun.), V.P. Antsupov // Dependability, 2013, no. 3(46), pp. 15-23.

13. Antsupov A.V., Antsupov A.V. (Jr.), Antsupov V.P. et al. Evaluation of durability stressed parts on the kinetic strength criterion. Materialyi 70-y nauchno-tehnicheskoy konferentsii: sb. dokl. Magnitogorsk [Proceedings of the 70th Scientific Conference: Sat Reports]. Magnitogorsk: Nosov Magnitogorsk State Technical University, 2012, vol. 1, pp. 137-141.

14. Antsupov A.V., Antsupov A.V. (jun), Antsupov V.P. Designed assessment of machine element reliability due to efficiency criteria. Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta im. G.I. Nosova [Vestnik of Nosov Magnitogorsk State Technical University]. 2013, no. 5(45), pp. 62-66.

15. Antsupov A.V., Antsupov A.V. (Jr.), Antsupov V.P. et al. The methodology of probabilistic assessment of machine elements according to different criteria. Mehanicheskoe oborudovanie metallurgicheskih zavodov: mezhregion. sb. nauch. tr. / pod red. Korchunova A.G. [Mechanical equipment of metallurgical plants. Ed. Korchunov A.G.]. Magnitogorsk: Nosov Magnitogorsk State Technical University, 2012, pp. 29-37.

16. Antsupov A.V. The scientific and methodological basis of forecasting reliability triboconjugation parametric design stage. Sovremennyie metodyi konstruirovaniya i tehnologii metallurgicheskogo mashinostroeniya: mezhdunar. sb. nauch. tr. / pod red. N.N. Ogarkova [Modern construction methods and technologies metallurgical engineering: Ed. N.N. Ogarkov]. Magnitogorsk: Nosov Magnitogorsk State Technical University, 2011, pp. 36-39.

17. Antsupov A.V., Antsupov A.V. (Jr.), Slobodyanskii M.G. et al. Reliability prediction and other friction units based on the thermodynamic analysis of the process of friction. Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta im. G.I. Nosova [Vestnik Magnitogorsk State Technical University named after G.I. Nosov]. 2010, no. 3, pp. 54-60.

18. Antsupov A.V., Antsupov V.P., Antsupov A.V. et al. Prediction reliability friction units by the criterion of wear on the stage of their projection-transformation. Trenie i smazka v mashinah i mehanizmah [Friction and lubrication in machinery]. 2010, no. 11, pp. 38-45.

19. Antsupov A.V., Antsupov A.V. (Jr.), Gubin A.S. et al. The methodology of probabilistic forecasting reliability and service life of tribological. Izvestiya Samarskogo nauchnogo tsentra RAN [Proceedings of the Samara Scientific Center of Russian Academy of Sciences]. 2011, vol. 13, no. 4(3), pp. 947-950.

20. Antsupov A.V., Chukin M.V., Antsupov A.V. (Jr.), Antsupov V.P. The scientific and methodological basis of forecasting reliability triboconjugation at the design stage. Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta im. G.I. Nosova [Vestnik of Nosov Magnitogorsk State Technical University]. 2011, no. 4. pp. 56-61.

21. Antsupov A.V., Antsupov A.V. (Jr.), Antsupov V.P. Methodology for predicting the reliability of tribological. Trenie i smazka v mashinah i mehanizmah [Friction and lubrication in machinery]. 2012, no. 2. pp. 3-9.

22. Antsupov A.V., Antsupov A.V. (Jr.), Antsupov V.P. Obespechenie nadezhnosti uzlov treniya mashin na stadii proektirovaniya [Ensuring the reliability of friction units of machines at the design stage]. Magnitogorsk: Nosov Magnitogorsk State Technical University, 2013. 293 р.

Details: Published: 07 September 2015; Last Updated: 07 September 2015; Hits: 3353