Belov V.K., Begletsov D.O., Gubarev E.V., Denisov S.V., Djakova M.V., Smirnov K.V. The use of 3D topographic characteristics of surfaces in engineering

Abstract

Change of 2D parameters for 3D parameters of texture will allow to describe properties of surface roughness with higher precision and to get new important performance characteristics of surfaces of metallurgy products. The use of roughness description is quite effective for research and development of technologies for manufacturing of products with given surface topography.

Keywords

Surface roughness, 3D texture, automotive sheet, sheet cover.

Belov Valery Konstantinovich – Professor, Physics department, Head of RC «Microtopography», Nosov Magnitogorsk State Technical University, Russia. Phone: 8 (3519) 20 92 00. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

Begletsov Danil Olegovich – Associate Professor, Nosov Magnitogorsk State Technical University, Russia.

Gubarev Evgeny Vladimirovich – Teaching, Associate Professor, Nosov Magnitogorsk State Technical University, Russia.

Denisov Sergey Vladimirovich – D.Sc. (Eng.), Head of Central Laboratory, OJSC «Magnitogorsk Iron and Steel Works», Russia.

Djakova Maria Viktorovna – Postgraduate Student, Nosov Magnitogorsk State Technical University, Russia.

Smirnov Konstantin Vital’yevich – D.Sc. (Eng.), Head of Cold-Rolled Products Laboratory, OJSC «Magnitogorsk Iron and Steel Works», Russia.

References

1. Jiang X. et al. 2007 Paradigm Shifts in Surface Metrology. Part I. Historical Philosophy. Proc. R. Soc. A 463, 2049-2070; Part II. The Current Shift. Proc. R. Soc. A 463, 2071-2099.

2. Stout K.J., Blunt L. Three-dimensional Surface Topography. Second Edition. Perton Press. London. 2000. 285 р.

3. Thomas T.R. Rough Surfaces, 2nd edition, Imperial College Press, 1999.

4. Whitehouse D.J. Handbook of Surface and Nanometrology, IOP, Publishing Ltd, 2003.

5. Belov V.K. Profili poverhnosti [Surface Profiles]. Magnitogorsk: MSTU, 2010, 260 p.

6. Belov V.K., Gorbunov A.V., Radionov A.F. and others. Producing of Automobile Sheet with Given Surface Roughness. Proizvodstvo prokata [Rolled Products Manufacturing]. 2007, no. 4, pp. 15-17.

7. MazurV.L. Surface Roughness of Thin-sheet Steel: Requirements and Process Technology. Stal’ [Steel]. 2012, no. 1, pp. 29-33.

8. Belov V.K., Ponomareva M.V., Gorbunov A.V. and others. Effect of Process Liquid on 2D and 3D Estimations of Surface Roughness of Tempered Steel. Stal’ [Steel]. 2012, no. 1, pp. 34-38.

9. Belov V.K., Ponomareva M.V. New in Metrology: Change of 2D Roughness parameters to 3D parameters of Surface Roughness. Kontrol i diagnostika [Testing and Diagnostics]. 2012, no. 7, pp. 57-63.

10. Belov V.K., Ponomareva M.V. and others. About Steel Sheet Production Technology with Given Surface Roughness for Automobile Industry, Steel Industry. Byulleten nauchno-tehnicheskoy i ekonomicheskoy informatsii «Chernaya metallurgiya» [Bulletin of Scientific and Economic Information]. 2012, no. 4, pp. 89-93.

11. Belov V.K., Ponomareva M.V. New Approaches for Regulation of Surface Roughness of Cold-Rolled Sheets with Help of Modern 3D Surface Parameters Steel Industry. Byulleten nauchno-tehnicheskoy i ekonomicheskoy informatsii «Chernaya metallurgiya» [Bulletin of Scientific and Economic Information]. 2012, no. 5, pp. 46-55.

12. Belov V.K., Djakova M.V., Las’kov S.A., Gorbunov A.V., Radionov A.F., Zhumargaliev N.I., Krivoschekov P.S. Comprehensive Analysis of Surface Roughness of Cold-Rolled and Zinc-Coated Strip with the Help of Modern 3D Criteria. Stal’ [Steel]. 2013, no. 11, pp. 36-41.

Details: Published: 07 September 2015; Last Updated: 07 September 2015; Hits: 2755