Tulupovа N.A., Guerra José Alonso, Levandovskiy S.A., Kinzin D.I., Sarancha S.Y. Experience of research of the billets and long products quality in the quality management system at the José Martí metallurgical plant (Cuba)

Abstract

To improve and develop metallurgical plants, it is required to continuously settle an issue on product quality control. The growth of the product quality is an essential part of a modern steel products market. In practice, quality issues are often settled by applying an integrated evaluation of the quality management system through audits. The article deals with experience of a quality management system audit at the Jose Marti Metallurgical Plant and provides information about solutions adopted as a result of such audit. In future we intend to cooperate with this plant as part of its significant revamping to increase its production efficiency.

Keywords

Quality management system, process audit, quality of billets and finished long products, quality control, section rolling.

Tulupovа Nataliya Aleksandrovna – Ph.D. (Eng.), Associate Professor, Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia. Phone: +7 (3519) 298 525. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

Guerra José Alonso – Deputy General Director of the José Martí Metallurgical Plant (Cuba).

Levandovskiy Sergey Anatolievich – Ph.D. (Eng.), Associate Professor, Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia. Phone: +7 (3519) 298 525. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

Kinzin Dmitriy Ivanovich – Ph.D. (Eng.), Associate Professor, Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia. Phone: +7 (3519) 298 525. E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it..

Sarancha Sergey Yurievich – Postgraduate Student, Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia. Phone: +7 (3519) 298 525.

References

1. Levandovskiy S.A., Moller A.B., Nazarov D.V., Zaitsev A.A. Sovershenstvovanie sushchestvuyushchikh tekhnologicheskikh skhem prokatki na osnove optimizatsii form kalibrov s tselyu povysheniya kachestva sortovoy produktsii [Improvement of existing rolling schedules by optimizing a pass design to improve the quality of long prod-ucts]. Modelirovanie i razvitie protsessov OMD [Simulation and development of metal forming processes], 2006, no. 1, pp. 129-137.

2. Moller A.B., Ruchinskaya N.A., Zaitsev A.A., Tulupov O.N., Lutsenko A.N. Ispolzovanie adaptivnoy strukturno-matrichnoy modeli dlya upravleniya kachestvom sortovogo prokata s raz-rabotkoy ratsionalnykh preduprezhdayushchikh deystviy [Us-ing an adaptive structural matrix model for long products qual-ity control, including development of reasonable preventive measures]. Nedelya metallov v Moskve sbornik trudov Kon-ferentsiy i Seminarov. redkol. : Sivak B. A. i dr. [A collection of papers presented at conferences and seminars at the Mos-cow Metal Week. The editorial staff includes Sivak B. A. et al.]. Moscow, 2007, pp. 357-367.

3. Moller A.B., Levandovskiy S. A., Ruchinskaya N. A., Limarev A. S., Simakov Yu.V., Loginov A.V., Nazarov D. V., Kolyasov D. V. Sovershenstvovanie sortoprokatnykh tekhnologicheskikh sistem cherez razvitie elementov menedzhmenta kachestva [Improved rolling technology systems through the development of elements of quality management]. Trudy Vos'mogo kongressa prokatchikov [Proceedings of the 8th Congress of Rolling Mill Engineers], 2010, pp. 224-229.

4. Kolokoltsev V.M. Nosov Magnitogorsk State Technical University. History. Development. Vestnik Magnitogorskogo Gosudarstvennogo Tekhnicheskogo Universiteta im. G.I. Nosova [Vestnik of Nosov Magnitogorsk State Technical University], 2014, no. 1(45), pp. 5–6.

5. Kolokoltsev V.M., Razinkina E.M. A university complex: integration and steadiness. Higher education in Russia, 2011, no. 5, pp. 3–10.

6. Kolokoltsev V.M., Razinkina E.M., Glukhova A.Yu. Training of qualified personnel at a university complex. News of the Samara Research Centre of the Russian Academy of Sciences, 2010, vol. 12, no. 1–2, pp. 615–618.

7. Kolokoltsev V.M. Five years from a performance review to another one. Vestnik Magnitogorskogo Gosudarstvennogo Tekhnicheskogo Universiteta im. G.I. Nosova [Vestnik of Nosov Magnitogorsk State Technical University], 2008, no. 1, pp. 5–11.

8. Gun G.S., Mezin I.Yu., Korchunov A.G., Chukin M.V., Gun I.G., Rubin G.Sh. The Magnitogorsk State Technical University school of science and education on product and process quality control. Quality in material processing, 2014, no. 1, pp. 5–9.

9. Gun G.S., Rubin G.Sh., Chukin M.V., Gun I.G., Mezin I.Yu., Korchunov A.G. Metallurgy qualimetry theory design and development. Vestnik Magnitogorskogo Gosudarstvennogo Tekhnicheskogo Universiteta im. G.I. Nosova [Vestnik of Nosov Magnitogorsk State Technical University], 2013, no. 5(45), pp. 67–69.

10. Rubin G.Sh., Chukin M.V., Gun G.S., Zakirov D.M., Gun I.G. Development of the theory of metalware qualimetry. Ferrous metals, 2012, no. 7, pp. 15–20.

11. Gun G.S., Rubin G.Sh., Chukin M.V., Gun I.G., Mezin I.Yu., Korchunov A.G. Metallurgy qualimetry theory design and development. Vestnik Magnitogorskogo Gosudarstvennogo Tekhnicheskogo Universiteta im. G.I. Nosova [Vestnik of Nosov Magnitogorsk State Technical University], 2003, no. 5, pp. 67.

12. Ruchinskaya N.A., Moller A.B., Tulupov O.N., Zaitsev O.Yu. Razrabotka tekhnologicheskikh metodov upravleniya kachestvom sortovogo prokata na osnove effektivnogo ispolzovaniya informatsionnykh modeley [Development of technological methods of quality control of long products through the efficient use of information models]. Trudy VII Kongressa prokatchikov [Proceedings of the 7th Congress of Rolling Mill Engineers], Moscow, 2007, pp. 197-203.

13. Sarancha S.Yu., Levandovskiy S.A., Statsenko Yu.S., Moller A.B. Informatsionnye tekhnologii kak instrument upravleniya kachestvom raskroya gotovoy produktsii i effektivnostyu sortoprokatnogo proizvodstva [Information technology as a management tool for cutting finished products and efficiency of section mills]. Mashinostroenie: setevoy elektronnyi nauchnyi zhurnal [Mechanical Engineering: Network Electronic Scientific Journal], 2014, no. 4, pp. 54-56.

14. Levandovskiy S. A., Moller A. B., Tulupov O.N. Optimizatsiya rezhimov formoizmeneniya na sovremennykh nepreryvnykh sortovykh stanakh [Optimization of the modes of forming on modern continuous section mills]. Naukam proizvodstvo Urala [Science and production in the Urals], 2005, p. 55.

15. Asanov V.N., Steblov A.V., Tulupov O.N., Lenartovich D.V. Sovershenstvovanie kalibrovki valkov dlya prokatki kruglykh i armaturnykh profiley [An improved roll pass design for rolling round and rebar products]. Stal’ [Steel], 2008, no. 11, pp. 90-91.

16. Levandovskiy S.A., Nazarov D.V., Limarev A.S., Moller A.B., Tulupov O.N. Razrabotka i primenenie baz dannykh tekhnologicheskikh parametrov s tselyu osvoeniya i sovershenstvovaniya sovremennykh sortoprokatnykh stanov [Development and use of databases of technological process parameters to develop and improve modern section rolling mills]. Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta im. G.I. Nosova [Vestnik of Nosov Magnitogorsk State Technical University], 2005, no. 4 (12), pp. 36-40.

17. Tulupov O.N., Kinzin D.I. Kalibrovka prostykh sortovykh profiley kak reshenie zadachi optimalnogo upravleniya [A roll pass design of simple section bars as a solution to optimal control problems]. Trudy Vos'mogo kongressa prokatchikov [Proceedings of the 8th Congress of Rolling Mill Engineers]. 2010, pp. 230-235.

18. Kinzin D.I., Rychkov S.S. Otsenka effektivnosti kalibrovki sor-tovykh profiley na osnove programmnogo kompleksa DEFORM-3D [Evaluation of the roll pass design efficiency based on software package DEFORM-3D]. Modelirovanie i razvitie protsessov OMD [Simulation and development of metal forming processes], 2011, no. 1, pp. 92-95.

19. Tulupov O.N., Moller A.B., Kinzin D.I., Kolyasov D.V., Zavyalov A.A., Simakov Yu.V. Modelirovanie tekhnolog-icheskikh vozmozhnostey stana 300-3 OAO «MMK» i ratsion-alnogo ispolzovaniya valkovykh shaib pri prokatke katanki iz shirokogo marochnogo sortamenta staley [Modeling techno-logical capabilities of mill 300-3 at OJSC MMK and a rational use of rolling rings, when rolling wire rods of a wide range of steel grades]. Modelirovanie i razvitie protsessov OMD [Simu-lation and development of metal forming processes], 2002, no. 1, pp. 208-213.

20. Lutsenko A.N., Monid V.A., Tulupov O.N., Ruchinskaya N.A., Limarev A.S., Ishchenko K.A. Primenenie pokazatelya soot-vetstviya profilya pri upravlenii kachestvom produktsii sortovykh stanov [Using indicators of compliance with a shape in product quality control of section rolling mills]. Proceedings of the 7th Congress of Rolling Mill Engineers, Moscow, 2007, pp. 221-228.

21. Tulupov O.N., Moller A.B., Kinzin D.I., Levandovskiy S.A., Ruchinskaya N.A., Nalivaiko A.V., Rychkov S.S., Ishmetiev E.N. Structural-matrix models for long product rolling pro-cesses modeling production traceability and forming consumer properties of products. Vestnik Magnitogorskogo gosudar-stvennogo tekhnicheskogo universiteta im. G.I. Nosova [Vest-nik of Nosov Magnitogorsk State Technical University], 2013, no. 5(45), pp. 46-50.

Details: Published: 28 July 2015; Last Updated: 30 July 2015; Hits: 4921