ISSN (print) 1995-2732
ISSN (online) 2412-9003

 

download PDF

Abstract

This article describes the results of a study that looked at the stress state and the specific force or contact pressure through the application of the slip line method and computer simulation (i.e. using the Deform 3D software package) when a workpiece was subjected to severe plastic deformation (SPD) in a special closed die. SPD is achieved when a flat punch is embedded in a round workpiece enclosed in the die and alternately compressed by a ring-shaped punch. Analysis of the results shows that compressive stresses prevail in the deformation zone resulting in the production of blanks with ultrafine-grained and/or nanostructure, as well as high mechanical properties. The relative discrepancy between the results obtained through the slip line method and those obtained through modelling in Deform 3D was about 1.3% indicating that the results can be considered reliable. It should be noted that this closed-die technique can be used to produce such products as gears, i.e. heavy-duty parts.

Keywords

Die, punch, container, specimens, workpieces, deformation, stress.

Ashkeyev Zh.A., Abdiramanov S.T. Karaganda State Industrial University, Temirtau, Kazakhstan

Andreyachshenko V.A. Satpayev Ekibastuz Technical and Engineering Institute, Ekibastuz, Kazakhstan

1. Karavaeva M.V., Abramova M.M., Enikeev N.A., Raab G.I., Valiev R.Z. Strengthening the strength of austenitic steel by combined loading. Letters on Materials 7 (1), 2017, pp. 29–33.

2. Ashkeyev Zh.A., Andreyachshenko V.A. Device for obtaining nanostructural materials. Patent RK, no. 32499, 2017.

3. Andreyachshenko V., Ashkeyev Zh., Kocich R. Stress state of workpieces due several plastic deformation by close matrix. Conference proceedings. 27th International Conference on Metallurgy and Materials Metal-2018, edited by Tanger (Brno Czech Republic, 2018).

4. Chukin M.V. et al. Application of the deformation nanostructuring method to the technological process of wire production. Technology of Mechanical Engineering, 2013, no. 4, pp. 5–9.

5. Nikitenko O.A., Efimova Yu.Yu., Zherebtsov M.S., Koptseva N.V., Baryshnikov M.P., Selivanova E.S. Formation of the ultrafine-grained structure of carbon steel in the processes of hot plastic deformation. Vestnik PNIIP, no. 1 (17), 2015, pp.31–41.

6. Polyakova M.A., Gulin A.E. Using the combination of various types of plastic deformation to produce an ultrafine-grained structure in a carbon wire. Izvestiya TulGU. Engineering science, vol. 10, part 2, 2014, pp. 143–150.

7. Gromov N.P. Theory of metal forming. Moscow: Metallurgiya, 1978, 360 p.